Geberit Duofix WC Frame H82 with Kappa UP200 Cistern 150mm 111.260.00.1 (7257) Blue

Geberit Duofix WC Frame H82 with Kappa UP200 Cistern 150mm

Geberit Duofix provides a comprehensive range with universal and self-supporting installation elements. These are available in drywall construction for all sanitary appliances including WC, washbasins and urinals. The wall-hung frames are suitable for partition wall installations, in-wall installations in stud-walls in lightweight construction, and part-height and room-height prewall installations and can be used in new buildings and renovations.

Features:

• Self-supporting Frame with C profile of 40/40 mm
• Height of frame : 820mm
• Comes in ultramarine blue powder coated frame
• Manufacturing code of this product is 111.260.00.1
• Frame with holes of Ø 9 mm for fastening in wood frame construction
• Galvanised leg support
• Steplessly adjustable : 0 to 20mm
• 50mm retraction feet
• for installation in UW50 profiles comes with rotating foot plate
• Fast adjustment of the actuator rods for flush plate
• Protection housing for service opening can be cut to length
• With wall anchors to allow up to a 200 mm duct
• Geberit Kappa concealed cistern 15 cm with front actuation
• Dual flush with Kappa flush plates and pneumatic buttons
• Water supply connection on the left side
• Fastening for outlet bend sound-absorbing
• Connection hose to angle stop valve can be screw-connected by hand
• The cistern can be operated with used water [rainwater]

Compatible to use with:

• Wall hung WC with bolt fixings set at 180 or 230 mm centres
• Partial-height Duofix system wall in front of a solid or drywall construction

Technical Information:

• Flow pressure range : 0.1 to 10 bar   
• Maximum Operating temperature for water : 25°C
• Flush volume factory setting : 5.8 and 3 litre
• Flush volume small range : 2.6 and 4 litre

Supplied Complete With:

• Water supply connection of R 1/2 inch, compatible with MeplaFix
• Integrated angle stop valve and hand wheel
• Protection housing for service opening
• Two protection plugs
• WC connection set of Ø 90 mm
• WC outlet bend - HDPE of Ø 90 mm
• Adaptor sleeve - HDPE of Ø 90/110 mm
• 2 threaded rods M12
• Fastening material

*Please Note: Flush-plate is not included - must be purchased separately

This Product is supplied with a 25 Year Manufacturer's Guarantee